-
Make your own breast forms
-
Take a large sandwich bag or similar water tight bag. Fill with water – about 200 – 250 ml will fill a B cup. Hold the bag so one corner is down, twist the bag closed until all the air has been expelled. Hold the tight twisted section and knot it as you would tie a balloon. As you tighten the knot move the knot up and away from the filled section so that the water is not under any pressure. If you get the knot right the bag will flop onto a hard surface and not roll around. Depending on your confidence in plastic you can then put the bag inside a second bag – but make sure again not to convert the result into a balloon. Finally wrap the bag in an old stocking foot.
Submitted by: Alison
-
Well when I want nice full breasts, I got two sandwich bags and poured in some flour tie it up and you got a set of breasts that have a real nice shape and bounce that looks real
Submitted by: Hailey
-
Try using removable shoulder pads. Some come already moulded and have enough sturdiness to hold up under your bra.
Submitted by: Derby
-
I use large size silk scarves. They are soft and can be easily shaped to fit the bra cup.
Submitted by: Natasha natashac
-
I prefer the Gel filled breast. Use 2 – 4 teaspoons of baby diaper powder(disposable nappy gel) + 500 ml of tap water per side. Place 1 condom inside another and add gel to inner (The scientific name of this powder is sodium polyacrylate and when water is added, it turns into a gelatin-like substance).
Add water via funnel to inner and tie off. (Blowing up outer condom can help with placing the one condom inside the other). Tie off the outer condom and place the form inside a knee high stocking (gives extra protection against punturing). Kneed the breast well to mix the gel powder and water. This mix approximates a B’ cup + makes a good nipple. Varing the amount of gel changes the consistancy ie firmness. For more instructions for making your own breast forms see the following sites.
Bloomburg Breast Forms FAQ -http://www.eskimo.com/~bloo/bformfaq/
http://www.geekbabe.com/annie/feature/forms/
http://www.geocities.com/WestHollywood/Village/8517/tips/tip04.html
Enjoy !!!
Submitted by: Rachel
-
for my breasts I use a nude bra (well its actually a secret bra, a $10 knockoff), one of them self adhesive completely strapless bras. they hold extremly well, I wear mine under my nighty everynight and every chance i get. they have never come off, move or anything and ive had them about 6 months. if they start to feel they’re losing their grip i just give them a wash and they’re as good as new. mine are size A which give my man boobs a bit extra and if I put them further apart and do up the clasp, instant cleavage. I went to get some more but unfortunatly the store is closing and had none left. Ive seen similar ones at Red Dot every now and then so I’ll try there next. ALL YOU GIRLS SHOULD GET SOME THEY ARE GREAT.
-
Tired of hauling around red lentils or popping corn in my bras I set out to get something a little more jelly like and tried the stuff from a Depends adult diaper. Wow is this stuff good. Cut open the diaper and shake, scrape or pull out all of the fibrefill into a very large mixing bowl. Add luke warm water untill you have a mixture of gel with the consistency you’d like. Use a measuring cup to get the size of boobie you like and put some gel into a small freezer bag. Squeeze out the air and tie the bag off. You can seal the bag off with a curling iron. Now you can put the baggies right into a bra and make a cloth patch to hold it in. Mine have lasted and lasted and the bra holds the shape wonderfully.
-
Hi All
And now for somthing compltely different ( Quote “Monty Python” yes I am a fan LOL )
For a filler try good old “Wetter soil Crystals ” with a little water they absorb the water , swell up many times their original size and do not leak, the consistancy , feel and weight are perfect.
.
I have made some plaster molds of breats , taken negatives of both inner and outer shapes to produce the outter shapes or casings I required for the final form , Then apply a thin layer of a 2 part silicon mix to the inside to give a slightly more substantial wall of the forms. Fill the form with Wetter Soil that I had previously mixed and then attached the back of the form that is eventually placed / stuck to your chest. To this side I add a little extra silicon mainly for strength.The latex edge of the forms I leave a fine tapered edge that you can blend or more correctly feather on to you chest after sicking the form on , apply a little more latex or spirit gum breast form clue ( roll on or skin bond ) to cover the edge. Then cover the edge with a little make up. Just the same as a teatrical make up artist would do when applying a latex skull cap to give an actor a bald appearence.
To go braless / see thru . it works a treat.
I also make my own V-string vaginas the only difference is I make a fibre glass mold from a plastersine model.
Materials are all readily available and cheap to boot
Have fun experimenting, I did
Cheers
Elle 😆 -
I bow down in absolute awe to the above people, they are brilliant. If we could harness this ingenuity we could rule the world!
I mean, who would think about using fishing lure material? And this: “baby diaper powder and (disposable nappy gel) + 500 ml of tap water per side. (The scientific name of this powder is sodium polyacrylate” or “Depends adult diaper filling”. “Wetter soil Crystals”, and as for making your own fibre glass vaginas!!!.
ladles I salute you, and I thought I was clever all those years ago with water filled balloons. -
Hi Elle and everyone
Just a quick question, The 2 part silicone that you refer to in your post, can you give us some more information about it, and a source to purchase itHugs to all
The now Kiwi girlRobbie
-
Hi Robbie
No problem but I see your in QLD I am in WA .
The base is called “Silicon base 3481” and the catalyst is Silastic curing agent 81,I get mine from a WA supplier ” Kirkside products Pty Ltd
21 Roberts Street Osbourne Park WA 6017 Ph 08 9242 2990
Or they have a web site www,kirkside.com.au You may also look at the web or do a google search for life form molding you will find all the technical information you need .
Cheers and let me know how you get on with your projects If you need any help I am always available
(((((((((((HUGZZZZZZZZ))))))))))))) elle
-
Hi girls ,
the best and easiest breasts i found , canary seed and stocking,
buy a box of canary seed at the supermarket , stockings . cut foot of stockings off fill with seed to size knot and fold into breasts , the weight , feel , bounce perfect breasts. fools everyonetiffy
-
A great supplier in Qld for all manner of mold making supplies, including Prosaide and Prosaide remover (waterproof Prosthetic Adhesive that is like the superglue for the skin) is http://www.armsmodelit.com.au
-
Although I have a set of silicon forms thanks to ” The Breast Form Store” . I still use the bird seed ones especially in summer. The thing that I do is that I cut the foot off and knot the bottom, which I then turn inside out. Then I fill the hose with the correct amount of seed for the size that I after and again tie a knot, I then turn the hose outside in to cover the first ‘bag’ with a second layer which I then tie off and cut off. this gives a more secure form and any ladders in the form are at less risk of leaving a trail of seeds for the birds to follow.
-
I came across this one while gardening. Due to the obvious nature of the drought here in Victoria I decided to make a pair of brest enhancers that feel somewhat nicer than foam or the like. Wait a minute you might say. What does gardening and drought have to do with breast enhancers?
When gardening I was using a product called water storage crystals, available from most garden supplies stors and bunnings. When water is added to the crystals they become a gel/jelly like substance.
Using measuring cups, plastic bags and some trial and error I came up with a fairly good, home made breast enhancer.
There is some trial and error, measuring, re-measuring involved but generally once you’ve determined the amount of jelly you want to plump up your brests place it in a plastic bag and then insie another for leakage/bursting protection. To seal a knot is tied and trimmed down and I found that if done right the knots work well as nipples. After this place some pantyhose or sockets over the enhancers and there you have it. A cheap and effective brest enhancer that feels nice too.
